If you're gearing up for a trade show, convention, or event, the Global Truss F34 10'x40' Display Booth with rounded corners and an open top front is your secret weapon for turning heads. Not only does this sleek and modern design make your brand pop, but it also creates an inviting space for attendees to step in and connect with you.

Let’s break down how to construct this impressive booth step by step — and don’t worry, we’ll keep it fun, simple, and effective. Plus, by the end, your booth will be as sturdy as it is eye-catching!

What’s in the Package?

Before we jump into the build, let’s quickly go over the parts:

✅ 5 pcs. Global Truss SQ-4112 6.56 ft. F34 Box Truss Segments — for the top horizontal structure, running across the width.
✅ 4 pcs. Global Truss SQ-4113 8.2 ft. F34 Box Truss Segments — for the top back horizontal trusses.
✅ 10 pcs. Global Truss SQ-4137 1' x 1' Base Plates — to anchor the vertical posts securely to the ground.
✅ 10 pcs. Global Truss SQ-4113 8.2 ft. F34 Box Truss Segments — for the vertical posts (2 at each corner, 2 at the middle sections, and 2 at the back center).
✅ 2 pcs. Global Truss SQ-4126-CR-L90 90-deg. 3-Way Rounded Corners — for the top back left and right corners.
✅ 3 pcs. Global Truss 4-Way 90-degree Corners — for the top back left middle, back center, and back right middle.
✅ 5 pcs. Global Truss SQ-4121-CR-L90 90-deg. 2-Way Rounded Corners — for the top front junction points (left, left middle, center, right middle, and right).

Step 1: Set the Foundation — Placing the Base Plates

Start by laying out the 10 base plates (SQ-4137):

• Place 4 base plates at each corner of the 10x40 ft rectangle.
• Position 4 base plates at the middle points along the length of the booth — two on the left side, two on the right.
• The final 2 base plates go at the back center to support the middle vertical posts.

Ensure all plates are firmly placed and evenly spaced — these will anchor your entire structure, so precision matters!

Step 2: Install the Vertical Posts

Time to build upwards! Use the 10 vertical trusses (SQ-4113, 8.2 ft):

• Connect 1 truss to each of the 4 corner base plates.
• Add 2 trusses at the back middle base plates.
• Attach 2 trusses each at the left and right middle base plates.

Double-check that all trusses are securely fastened to the base plates — you want them standing strong and straight.

Step 3: Build the Top Horizontal Back Structure

Now let’s form the back frame:

• Using the 4 back horizontal trusses (SQ-4113, 8.2 ft), connect the vertical posts from left to right at the back of the booth.
• Secure the 90-degree 3-way rounded corners (SQ-4126-CR-L90) at the top left and right back corners.
• For the middle vertical posts, attach the 4-way 90-degree corners — one at the back left middle, one at the back center, and one at the back right middle.

This forms a sturdy back frame that will support banners, lighting trusses, and any branding displays.

Step 4: Create the Top Front Horizontal Structure

Let’s tackle the open top front design:

• Use the 5 horizontal trusses (SQ-4112, 6.56 ft), running perpendicular to the back frame.
• Connect the 2-way rounded corners (SQ-4121-CR-L90) at the front left, front left middle, center, front right middle, and front right top junction points.
• Attach these trusses to the vertical posts along the front, creating a smooth, open frame with rounded edges.

The open top front means there's no truss running horizontally across the very front — this keeps the design inviting and ensures attendees can step right in without obstruction.

Step 5: Final Adjustments and Safety Checks

With the frame fully assembled:

• Ensure all trusses are securely locked in place.
• Double-check all junctions and corners — especially the rounded corners — for stability.
• Adjust the base plates if needed to balance the structure evenly on the floor.

If you're adding lighting trusses or branding displays, this is the time to mount them. The Global Truss F34 aluminum truss system is designed to support dj lighting truss setups, banners, and other hanging elements without compromising stability.

Why This Booth Design Rocks

✅ Sleek and Modern: The rounded corners create a polished look, while the open top front makes your booth feel welcoming and spacious.
✅ Highly Visible: At 10x40 feet, this booth is a showstopper. With space for lighting trussing, display booth truss setups, and dj trussing for audio/visual effects, you'll grab attention from across the exhibition hall.
✅ Modular Flexibility: Need to adapt the size for future events? The Global Truss F34 system is fully customizable — perfect for evolving booth needs.
✅ Strong Yet Lightweight: Thanks to its aluminum truss build, this booth is both sturdy and easy to transport — no unnecessary weight, just pure strength.

Ready to Build Your Best Booth Yet?

The Global Truss F34 10'x40' Display Booth with rounded corners and an open top front isn’t just about looking good — it’s about boosting your brand visibility, attracting more foot traffic, and ultimately converting leads into loyal customers.

If you're serious about standing out at your next trade show or event, this is the booth you need.

➡️ Get your Global Truss F34 10'x40' Display Booth today at Famous Stages — and take your event game to the next level!