If you're ready to elevate your trade show presence, concert stage, or product activation to iconic status, this one’s for you. Introducing the Global Truss 10x14x17 ft Center Arc Booth with Left and Right 10x10 ft Wings — a dazzling display that blends architectural flair with heavy-duty performance. Whether you’re a production manager, touring DJ, or trade show mastermind, this guide will walk you through the step-by-step assembly using top-of-the-line Global Truss F34 components.

Let’s truss up and get started!

🎯 Why Build This Booth?

This configuration gives you:

• A stunning center arch that commands attention at 17 feet tall.
  
• Two 10x10 ft side wings for extra product displays, sponsor logos, lighting trussing, or audio gear.
  
• Full aluminum truss construction for portability, strength, and aesthetic impact.
  
• Compatibility with banners, intelligent lighting, and even lightweight LED video walls.
  

🔧 STEP 1: Construct the 10x14x17 ft Center Arc Booth

We’re starting with the star of the show — the center arch. Here's what you’ll need:

✅ Materials:

• (1) Circle Kit – Global Truss F34 SQ-C4-90
      → 2 pcs. 1/4 Arc for the front + 2 pcs. 1/4 Arc for the back
  
• (6) ST-UJB-12 Junction Blocks
      → 4 for the four corners of the booth, 2 for connecting the center arc beam
  
• (4) F34 Box Truss 9.02 ft
      → These will be your tall, proud vertical posts
  
• (4) SQ-4137 Steel Base Plates
      → For rock-solid footing and easy leveling
  
• (3) F34 Box Truss 8.2 ft
      → One for each side on top, and one as your center beam
  

🛠️ Assembly:

1. Lay the foundation: Place all four SQ-4137 Steel Base Plates on level ground in a rectangle (14 ft wide x 10 ft deep).
   
2. Install verticals: Bolt the F34 9.02 ft box trusses vertically into each base.
   
3. Connect the top: Use ST-UJB-12 Junction Blocks at the top of each post.
   
4. Add side trusses: Span the left and right sides with 8.2 ft trusses between the front and back UJBs.
   
5. Mount the Arc: Connect the front 1/4 circle trusses (forming a half-circle) to the top front UJBs. Repeat for the rear.
   
6. Top center beam: The final 8.2 ft truss goes between the midpoints of the front and back arcs using the remaining two ST-UJB-12s to form a spine.
   

And boom — your center arc booth is standing tall, sleek, and oh-so-ready to impress.

➕ STEP 2: Add the Left Wing 10x10 ft Booth

Let’s extend your space and add functionality. This left-side expansion adds a 10x10 booth — perfect for sponsor banners, gear racks, or portable stages.

✅ Materials:

• (2) ST-UJB-12 Junction Blocks
  
• (2) F34 Box Truss 9.02 ft – for vertical posts
  
• (2) F34 Box Truss 9.02 ft – for top front and back trusses
  
• (1) F34 Box Truss 8.2 ft – for the top left side truss
  
• (2) SQ-4137 Steel Base Plates
  

🛠️ Assembly:

1. Place base plates parallel to the center booth’s left side, 10 ft apart.
   
2. Insert the vertical trusses (9.02 ft) into the base plates.
   
3. Connect to the center booth via the left-side ST-UJB-12s from the main structure.
   
4. Use two more UJBs at the top of the new verticals to complete the top frame.
   
5. Finish the roof:
• Front: 9.02 ft truss
  
• Back: 9.02 ft truss
  
• Side: 8.2 ft truss connecting to the center structure.
  

Congratulations — your left wing booth is now part of the action!

➕ STEP 3: Add the Right Wing 10x10 ft Booth

Balance is everything. Time to mirror the left wing and complete this truss masterpiece.

✅ Materials:

• (2) ST-UJB-12 Junction Blocks
  
• (2) F34 Box Truss 9.02 ft – vertical supports
  
• (2) F34 Box Truss 9.02 ft – top front and back
  
• (1) F34 Box Truss 8.2 ft – top right side
  
• (2) SQ-4137 Steel Base Plates
  

🛠️ Assembly:

1. Mirror the left-side process on the right side of your center arc booth.
   
2. Base plates? Check.
   
3. Vertical trusses? Up and locked in.
   
4. Junction blocks? Connected to both center booth and wing verticals.
   
5. Top trusses in place? Your booth now spans over 30 feet wide!
   

✨ Why This Booth Wows Every Time

• Curved design = visual impact
  
• Expandable wings = more functional space
  
• Global Truss F34 system = lightweight, modular, and heavy-duty
  
• Easily integrates with stage truss, dj trussing, lighting truss, banners, and lightweight AV gear
  
• Ideal for trade show booth truss, display booth truss, and convention booth truss applications
  

🛒 Ready to Build This Booth?

Don’t just read about it — build it! Get every part listed in this guide from FamousStages.com — your #1 source for all things global truss, dj lighting truss, portable stages, aluminum truss, and stage trussing.

🧰 Need help customizing your design?
📞 Call our truss experts or message us anytime!

🚀 Bonus Tip:

Add LED uplights inside the arc, or mount moving heads and gobos to the top trusses for a jaw-dropping nighttime effect. Yes, your booth can literally glow with greatness.