Are you ready to take your event space to the next level? Whether you're hosting a trade show, convention, or DJ setup, the Global Truss F34 10'x32' Display Booth-3 with rounded corners and an open front provides a sleek, professional look that can showcase your brand like never before. With stage truss, stage trussing, global truss, lighting truss, dj truss, and display booth truss all working together, this setup screams sophistication and strength.

In this guide, we'll walk you through the entire process step by step, so you can have this aluminum truss system up and running in no time. Let’s get started!

🎯 Materials You'll Need:

Base and Vertical Support

✅ 8 pcs. Global Truss SQ-4137 1' x 1' Base Plates
✅ 8 pcs. Global Truss SQ-4113 8.2 ft. F34 Box Truss Segments for vertical posts

• 2 for the left corners
• 2 for the left middle
• 2 for the right middle
• 2 for the right corners

Horizontal Top Trusses

✅ 4 pcs. Global Truss SQ-4112 6.56 ft. F34 Box Truss Segments for the top horizontal trusses

• 1 left side
• 1 left middle
• 1 right middle
• 1 right side

✅ 3 pcs. Global Truss SQ-4113 8.2 ft. F34 Box Truss Segments for the top horizontal back trusses

Corner Connectors

✅ 2 pcs. Global Truss SQ-4126-CR-L90 90-degree 3-Way Rounded Corners

• 1 for the top left back corner
• 1 for the top right back corner

✅ 2 pcs. Global Truss 4-Way 90-degree Corners

• 1 for the top back left middle
• 1 for the top back right middle

✅ 4 pcs. Global Truss SQ-4121-CR-L90 90-degree 2-Way Rounded Corners

• 1 for the front left top corner
• 1 for the front left middle
• 1 for the front right middle
• 1 for the front right top corner

🛠️ Step 1: Lay Out the Base Plates

Start by laying out the 8 base plates (SQ-4137) to define the 10'x30' space. Place 4 base plates at each corner and the remaining 4 at the left and right middle points to create a solid foundation. Make sure they’re level and aligned properly to ensure stability for the truss structure.

🚀 Step 2: Install the Vertical Posts

Time to go vertical! Attach the SQ-4113 8.2 ft. truss segments to each base plate:

• 2 vertical posts on the left corners
• 2 vertical posts in the left middle section
• 2 vertical posts in the right middle section
• 2 vertical posts on the right corners

Secure them tightly to the base plates to ensure stability and safety.

🔗 Step 3: Connect the Top Horizontal Back Trusses

Next, connect the 3 pcs. SQ-4113 8.2 ft. horizontal trusses to the top of the back vertical posts. These trusses run horizontally along the back of the booth, connecting the left and right corners and providing structural integrity.

• Attach the SQ-4126-CR-L90 90-degree 3-way rounded corners to the top back left and right corner vertical posts.
• Use the 4-way 90-degree corners on top of the left and right middle vertical posts at the back to complete the connection.

This forms a strong and stable back frame.

🎡 Step 4: Build the Top Front Trusses with Rounded Corners

To give your booth a modern, sleek look, the top front section remains open, adding a touch of elegance. Use the 4 pcs. SQ-4112 6.56 ft. horizontal trusses(perpendicular to the back horizontal trusses) for this step:

• 1 truss on the left side
• 1 truss in the left middle
• 1 truss in the right middle
• 1 truss on the right side

Secure these trusses by attaching them to the SQ-4121-CR-L90 90-degree 2-way rounded corners at the front corners and the 3-way back corners and 4-way middle junction connection points which sit on top of the vertical posts.

🎥 Step 5: Lift and Secure the Structure

Now that the top structure is fully connected, it’s time to raise it. With the help of a few extra hands (and some ladders), carefully lift the upper structure and secure it onto the vertical posts.

Double-check that all connections are tightened properly, and ensure that the structure is level and balanced.

💡 Step 6: Final Touches and Safety Check

Before declaring victory, go through a quick checklist:
✅ Tighten all bolts and couplers.
✅ Make sure all corners and trusses are properly aligned.
✅ Test the stability by applying slight pressure to ensure there’s no wobbling.

🎉 Why This Setup is Perfect for Your Next Event

This Global Truss F34 10'x32' Display Booth-3 with rounded corners and an open front isn’t just visually appealing—it’s built to withstand the demands of any trade show or event. Whether you're showcasing products, setting up a dj truss system, or creating an eye-catching trade show booth truss, this system is built to impress.

• Aluminum truss for durability and a lightweight structure.
• Portable stage and trussing system for quick assembly and dismantling.
• Ideal for convention booth trusses, display booth trusses, and lighting trusses for maximum versatility.

📢 Buy Your Truss System Today from FamousStages.com!

Ready to elevate your next event? Get your hands on the Global Truss F34 10'x32' Display Booth-3 with Rounded Corners from FamousStages.com. We offer the best deals on stage truss, dj truss, aluminum truss, and lighting truss systems that are guaranteed to turn heads.

👉 Don’t wait—order now and get your booth setup ready in no time!